Design Your Own Gun Rack, Gun Closet or Weapons Storage Room
All of our weapon storage racks are designed as part of a truly modular gun storage system. Each hanger is fully adjustable, allowing you to easily add, remove, or rearrange components to suit your changing needs. This modular design provides the freedom to optimize your layout for additional firearms or update the configuration for a refreshed look. Our standardized hole pattern ensures long-term compatibility, meaning that every current and future hanger we offer will fit perfectly once your panels are installed.
Building your dream Gun Rack is simple and quick if you follow the steps below:
STEP 1: Measure the width of the wall you want to put the Gun Storage Rack on with a tape measure
STEP 2 : (only applies to standard wall panels) Choose the size of the Support Bar that will fit the rack you are looking to build. A Support Bar is necessary to secure the weapon storage system to the wall. (example: if you want to build a 6′ wide rack, choose the 72″ support bar. If you want to build a 9′ gun storage rack choose a 72″ bar and a 36″ bar)
STEP 3: Choose the Wall Panels that will build your perfect weapon storage rack
(You may need two different size panels depending on the size of your wall)
STEP 4: (only applies to standard wall panels) Choose the Trim pieces for your rack. Trim Pieces are made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed.
STEP 5: Choose the Hangers and Accessories to fill out your completed Weapon Storage Rack
STEP 6: Make sure to choose GREY, TAN or Brown panels and accessories at checkout.
TRIM PIECES
(Needed for Standard panels only)
23” wide Support Bar to install the standard wall panels. This part is needed on the top of each standard wall panel column. This part fits the WP-24.23 and WP-48.5. Includes 2 rubber caps and screws.
Made from 14 gauge steel. Tan, grey and brown color, powder coating. The dimensions are 2” high X 23” wide. Sold as each.
36″ wide Support bar to install the standard wall panels. This part is needed on the top of each standard wall panel column. It works with WP-24.36 and WP-48.5. Includes 2 rubber end caps and screws.
Made from 14 gauge steel. Tan, grey and brown color, powder coating. The dimensions are 2” high X 36” wide. Sold as each.
41″ wide Support bar to install the standard wall panels. This part is needed on the top of each standard wall panel column. It works with WP-24.41 and WP-48.5. Includes 2 rubber end caps and screws.
Made from 14 gauge steel. Tan, grey and color, powder coating. The dimensions are 2” high X 41” wide. Sold as each.
72″ wide Support bar to install the standard wall panels. This part is needed on the top of each standard wall panel column. It works with WP-24.36 and WP-48.5. Includes 2 rubber end caps and screws.
Made from 14 gauge steel. Tan, grey and brown color, powder coating. The dimensions are 2” high X 72” wide. Sold as each.
STANDARD WALL PANELS
Standard Wall Panel with slot hanger holes. Offers 14 rows across of alternating slot holes. This wall panel is used for small to large wall coverage. Can be configured next to the WP-24.36. Gives great options for hanger and shelf placement.
For the proper installation, the SB-23 support bar is needed for top of each Wall Panel column.
Made from 16 gauge steel. Available in Tan, Grey and Brown powder-coat finish. Dimensions: 24” high X 23” wide. Sold as each.
Standard Wall panel with slot hanger holes. Offers 22 rows across of alternating slot holes. This wall panel is used for small to large wall coverage. Gives the maximum options for hanger and shelf placement.
For the proper installation, the SB part (SB.36 or SB.72) is needed for top of each Wall Panel column.
Made from 16 gauge steel. Available in Tan, Grey and Brown powder coating. Dimensions: 24” high X 36” wide. Sold as each.
This standard Wall Panel is designed for stand-alone area’s, fits 12 vertical rifles across. 24” high x 41” wide Wall Panel with slot hanger holes. Offers 24 rows across of alternating slot holes. Gives great options for hanger and shelf placement.
For the proper installation, the SB-41 support bar is needed for top of each wall panel column.
Made from 14 gauge steel. Available in Tan, Grey and Brown powder-coat finish. Dimensions: 24” high X 41” wide. Sold as each.
TRIM PIECES
(Optional for Standard panels only
Weapons storage system 23″ wide trim piece that’s made to cover the mounting strips that show on top and bottom of the standard Wall Panels once the rack is installed. The slanted shapes clean up all the mounting holes. This piece easily mounts with magnets and stays securely in place. To cover all the mounting holes, you will need 1 trim piece for the top and bottom of each 23″ wide rack column.
Made from 17 gauge steel. Tan, grey and brown color powder-coating. The dimensions are 3/4” high x 23” wide. Sold as each.
Weapon storage system 36″ wide trim piece that’s made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed. The slanted shapes clean up all the mounting holes. This piece easily mounts with magnets and stays securely in place. To cover all the mounting holes, you will need 1 trim piece for the top and bottom of each 36″ wide rack column.
Made from 17 gauge steel. Tan, grey and brown color powder-coating. The dimensions are 3/4” high x 36” wide. Sold as each.
Weapon storage system 41″ wide trim piece that’s made to cover the mounting strips that show on top and bottom of the standard Wall Panels once the rack is installed. The slanted shapes clean up all the mounting holes. This piece easily mounts with magnets and stays securely in place. To cover all the mounting holes, you will need 1 trim piece for the top and bottom of each 41″ wide rack column.
Made from 17 gauge steel. Tan, Grey or Brown color powder-coating. The dimensions are 3/4” high x 41” wide. Sold as each.
THIN WALL PANELS
(No Trim Piece or Support Bar Needed)
The Thin Wall Panel system is perfect for small areas like workbench locations, inside a traditional safe, a secure closet, RV’s etc. Fits 3 vertical rifles or other hanger configurations. Great for a vertical only rifle setup. These panels do not interlink with others but can easily be stacked next to or on top of.
11” high x 9 ¾” wide Wall Panel with slot hanger holes. Offers 5 rows across of alternating slot holes. NO support bar (SB parts) or trim kit (TK parts) is needed for this panel. It works great with the VH-SSF- 3.2 stock shelf.
Made from 16 gauge steel, available in Tan, Grey and Brown color, powder-coat finish. Dimensions: 11” high X 9 ¾” wide. Sold as each.
The Thin Wall Panel system is perfect for small areas like workbench locations, inside a traditional safe, a secure closet, RV’s etc. Fits 9 vertical rifles or other hanger configurations. Great for a vertical rifle setup. These panels do not interlink with others but can easily be stacked next to or on top of.
11” high x 29” wide Wall Panel with slot hanger holes. Offers 17 rows across of alternating slot holes. NO support bar (SB parts) or trim kit (TK parts) is needed for this panel. It works great with the VH-SSF-3.2 stock shelf. Includes wall panel.
Made from 16 gauge steel, available in Tan, Grey and Brown color, powder-coat finish. Dimensions: 11” high X 29” wide. Sold as each
The Thin Wall Panel system is perfect for small areas like workbench locations, inside a traditional safe, a secure closet, RV’s etc. These panels work great to fill in smaller wall spaces in gun-rooms and/ or armories. This panel fits 12 vertical rifles or other hanger configurations. Great for a vertical rifle setup. It works great with the VH-SSF-3.2 floor stock shelves. These panels can be stacked next to each other but do not interlink.
16” high x 41” wide Thin Wall Panel with slot hanger holes. Offers 24 rows across of alternating slot holes. NO support bar (SB parts) or trim kit (TK parts) is needed for this panel.
Made from 14-gauge steel. Available in Tan, Grey and Brown powder-coat finish. Dimensions: 16” high x 41” wide. Weight: 15 lbs. Sold as each.
The thin wall panel products are meant for small areas like work bench locations, inside a traditional safe, a secure closet, RV’s etc. They work great for stand-alone racks and for smaller wall spaces in gun rooms and/ or armories. This panel is really efficient for vertical rifle set up paired with our VH-SSF, vertical floor stock shelves. It fits 10 1/2 vertical rifle hangers or tons of other hanger configurations. NOTE: unlike the other thin wall panels, when these panels are installed side by side, the pattern WILL continue on perfectly.
8” high x 36” wide wall panel with slot hanger holes. Offers 22 rows across of alternating slot holes. NO support bar (SB parts) or trim kit (TK parts) is needed for this panel.
Made from 14-gauge steel. Available in Tan, Grey and Brown color powder coat finish. Dimensions: 8” high x 36” wide x ½” deep. Sold as each.
The thin wall panel products are meant for areas where a full rack isn’t necessary. They work great for stand-alone racks and for smaller wall spaces in gun rooms. This panel is designed for horizontal gun display. Because the panels are so thin most of the wall will show behind the guns being displayed. The spacing for the hanger adjustment is closer than normal for even adjustability.
These panels interlink with each other when installing them one on top of the other.
Made from 14-gauge steel. Available in Tan, Grey and Brown color powder coat finish. Dimensions: 24” high x 3 wide. Sold as each.
The Thin Wall Panel system is perfect for small areas like workbench locations, inside a traditional safe, a secure closet, RV’s etc…. These panels work great to fill in smaller wall spaces in gun-rooms and/ or armories. It works great with the magwell hangers (MWH and MWV) or other hanger configurations. These panels can be stacked next to each other but do not interlink. This model is a replacement for our standard panels, WP-48.5.
48” high x 5” wide Wall Panel with slot hanger holes. Offers 3 rows across of alternating slot holes. NO support bar (SB parts) or trim kit (TK parts) is needed for this panel.
Made from 14-gauge steel. Available in Tan, Grey and Brown color powder coat finish. Dimensions: 48” high x 5” wide. Sold as each.
The thin wall panel products are meant for areas where a big, full rack isn’t necessary. They work great for stand-alone racks and for smaller wall spaces. This panel is mainly designed for vertical gun storage but almost all our hanger will fit so the different configurations are endless. These panels can be installed next to each other (or other thin panels) and the hole pattern up/down will match up but pattern side to side will be a little off.
Offers 5 rows across of alternating slot holes. NO support bar (SB parts) or trim kit (TK parts) is needed for this panel.
Made from 14-gauge steel. Available in Tan, Grey and Brown color powder coat finish. Dimensions: 50” high x 9¾ wide. Sold as each. Weight 10lbs.
HORIZONTAL HANGERS
Heavy Duty Horizontal Hanger that supports 1 rifle stock. This is specially designed for large rifles such as 50 Cal’s. It attaches to the wall panel with 3 hooks (instead of 2) and holds the rifles further away from the wall to fit bipods etc. This part can also be used to support the rifle barrel when hanging it horizontally on any of the wall panel products. 2 horizontal hangers are required for each rifle. Please note: When two are needed, order Item: HHD-S-1 Pair.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber insert to protect the rifle.
Dimensions: 5.5″ high x 5.5″ deep.
Weight: 1.5 lb.
Sold as each.
Horizontal wall hanger that supports 1 rifle barrel. This part is used to support the rifle barrel when hanging it horizontally on any of the wall panel products. 2 horizontal hangers are required for each rifle. Note the opening of the hanger and make sure it fits the barrels. Some accessories such as suppressors may not fit so you will need to use a part with a wider opening like #HH-S-1.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber insert to protect the rifle.
Dimensions: 4″ high x 4″ deep.
Weight: 1 lb.
Sold as each.
Horizontal wall hanger that supports 1 rifle barrel. This part is used to support the rifle barrel when hanging it horizontally on any of the wall panel products. 2 horizontal hangers are required for each rifle. Note the opening of the hanger and make sure it fits the barrels. Some accessories such as suppressors may not fit so you will need to use a part with a wider opening like #HH-S-1.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber insert to protect the rifle.
Dimensions: 4″ high x 4″ deep.
Weight: 1 lb.
Sold as each.
Horizontal wall hanger that supports 1 rifle. This hanger will support either the barrel/ hand guard or the stock part of the rifle. Wider “U” to fit suppressed guns or one’s with larger hand guards and/or rails. This particular part has a wider “U” to fit bigger guns
Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber insert to protect the rifle.
Dimensions: 4″ high x 4″ deep.
Weight: 1 lb.
Sold as each.
Hybrid Horizontal Hanger. The “Hybrid” design features half steel and half HDPE, a high-end plastic composite material. This hanger can be used for either side of the rifle (stock or barrel) and will also fit extra wide weapons. On the rack, these hangers can be adjusted up or down so the rifles sit straight or at the desired angle. 2 hangers of these hangers are required to hang 1 weapon.
Made from 14-gauge steel and HDPE
Powder coat finish
Available in Tan, Grey and Brown.
Dimensions: 3 ½” high x ½” wide x 4” deep
Weight: 1 lb
Sold as each
Hybrid Horizontal Hanger Pair for 1 Rifle. This Hybrid hanger pair combines a steel base with an HDPE (high-end plastic composite) face, giving you a durable, low-profile solution for securing a single long gun. The extra-wide design easily accommodates larger or non-standard rifles, while the adjustable mounting height lets you position your firearm straight or at a customized angle on the rack.
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Specifications:
Dimensions: 3.5” High x 0.5” Wide x 4” Deep
Weight: 1 lb.
Sold as a Pair.
Hybrid Horizontal Hanger, 3-rifle. This set holds 3 rifles on an angle in the “waterfall” look. It takes less rack space than 3 horizontal rifle but all 3 rifles can still be seen. The “Hybrid” design features half steel and half HDPE, a plastic composite material. This hanger is universal so it can be used on either end of the rifle. Everything you need to hold 3 rifles horizontal. Includes 2 steel hangers, 2 HDPE “U” inserts and all necessary screws.
Steel part of the hanger:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown.
HDPE part of the hanger:
Made from a high density plastic composite material
Available in Black
Total hanger:
Dimensions: 4” high x 4” wide 15” deep
Weight: 3 lbs.
Sold as set, 2 pieces
Horizontal 3-rifle hanger, on angle. This hanger is used to hold 3 rifles horizontal and angles down so you can see some of each weapon. This same model is used for the stock area and also the handguard/ barrel area. Two of the HH-S-3A.1 parts are needed for each set up. They can be adjusted up/ down and side to side for the perfect fit and look.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown color
Dimensions: 6” high x 10” deep
Weight: 3 lbs
Sold as Pair
Heavy-duty hybrid horizontal hanger designed for larger, heavier rifles such a .50 cals. It attaches to the rack at 3 points instead of 2 and holds the rifle further away to fit larger accessories like bipods, lights etc. This hanger can be used for either side of the rifle, barrel or stock and can also fit wider guns. The hybrid design features half steel and half HDPE, a high-end plastic composite material that will prevent any damage to the gun. 2 hangers are required to hang each rifle.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown.
Dimensions: 6 ¾” high x 1” wide x 5 ½” deep
Weight: 1 lb.
Sold as each
Heavy-duty hybrid horizontal hanger designed for larger, heavier rifles such a .50 cals. It attaches to the rack at 3 points instead of 2 and holds the rifle further away to fit larger accessories like bipods, lights etc. This hanger can be used for either side of the rifle, barrel or stock and can also fit wider guns. The hybrid design features half steel and half HDPE, a high-end plastic composite material that will prevent any damage to the gun. 2 hangers are required to hang each rifle.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Gray and Brown color
Dimensions: 6 ¾” high x 1” wide x 5 ½” deep
Weight: 1 lb.
Sold as a Pair
Horizontal Hybrid Hanger for 45-degree mounting. Designed for panels at a 45-degree angle while keeping the rifle upright, it features a hybrid design of half steel and half HDPE. This versatile hanger works for both the stock and barrel of the gun and accommodates wider weapons. Each set includes everything needed to hang one rifle: 2 steel hangers, 2 HDPE “U” inserts, and all necessary screws.
Steel part of the hanger:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown.
HDPE part of the hanger: Made from a high density plastic composite material
Available in Black
Completed hanger:
Dimensions: 6” high x 1” wide 7” deep
Weight: 2lbs
Sold as set, 2 pieces
VERTICAL HANGERS
Vertical wall hanger that supports 1 rifle barrel. This part is used to support the rifle barrel when hanging it vertically on any of the wall panel products. Note the opening of the hanger and make sure it fits the barrel. Some accessories such as suppressors may not fit so you will need to use a hanger with a wider opening like part# VH-S-1.
Rubber insert to protect rifle.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3.5” high X 7” deep.
Weight: 1 lb.
Sold as each.
Vertical hanger that holds the rifle vertical but sideways. This part is used to support the upper part of the rifle when hanging it vertical-sideways on any of the wall panel products. Comes with a heavy-duty piece of Velcro to secure the rifle in place. Part VHS-SS-1 completes the set.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 4” high X 3.5” wide.
Weight: 1 lb.
Sold as each.
Vertical wall hanger that supports 1 rifle. This hanger will support the top end of the rifle when in vertical position. Wider “U” to fit suppressed guns or one’s with larger hand guards and/or rails. This particular part has a deeper “U” to bring the rifle closer to the wall panel.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3 ½” high X 3 ¼” wide X 5” deep.
Weight: 1 lb.
Includes mounting screw.
Sold as each.
This part is used to support the upper part of the rifle when hanging it vertically on any of the wall panel products. Works great for standard long guns but also fits rifles with wider hand guards and/or suppressors.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber insert to protect the rifle.
Dimensions: 3.5″ high x 7″ deep.
Weight: 1 lb.
Sold as each.
Vertical Hanger with Retention Strap. Steel hanger with a heavy-duty Velcro strap to hold the weapon in place. Will fit large stocks, large hand guards, barrels and suppressed weapons. Great for safe doors, movable racks and mobile applications. Large surface area for the rifles to rest and protected with foam pad. Includes steel hanger, Velcro strap and mounting screw.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown color
Dimensions: 3 ½” high x 3 ¼” wide x 4 ½” deep
Weight: 1 lbs.
Sold as each
Hybrid Vertical Hanger. The “Hybrid” design features half steel and half HDPE, a high-end plastic composite material. This hanger is meant for the upper part of the rifle. The special shape of the “U” allows it to fit most stocks, hand guards, barrels and suppressed rifles. The HDPE insert can be adjusted closer or further from the rack depending on the weapon. One of our stock support shelf hangers are required to hang a weapon correctly.
Made from 14-gauge steel and HDPE
Powder coat finish
Available in Tan, Grey and Brown.
Dimensions: 3 ½” high x 3 1/4” wide x 7” deep
Weight: 2 lbs
Sold as each
This set includes three upper hangers designed for securing long guns in a vertical configuration. Each “Hybrid” hanger combines a steel body with an HDPE (high-end plastic composite) insert, giving you a strong, protective contact surface for your firearms.
Note: This upper hanger set must be used with one of our stock support shelf hangers to properly support and secure the weapon.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber inserts to protect the rifles.
Dimensions: 3.5” high X 7” deep.
Weight: 1.6 lbs.
Sold as each.
Hybrid Vertical Upper Hanger. Holds 3-rifle. The “Hybrid” design features half steel and half HDPE, a plastic composite material. This hanger is for the upper part of the rifles in vertical storage. The HDPE insert can be adjusted to hold the rifles further or closer to the rack. Allows plenty of room for mounted optics. Includes the steel hanger, HDPE “U” insert and installation screws. Includes: 1 steel hanger, 1 HDPE insert, and all necessary screws.
Steel part of the hanger:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Gray and Brown
HDPE part of the hanger:
Made from a high density plastic composite material
Available in Black
Total hanger:
Dimensions: 3 ¾” high x 9 ¾” wide 6” deep
Weight: 2 lbs.
Sold as each
Vertical hanger that supports 3 rifle. This part is used to support the upper part of the rifles when hanging it vertically on any of the wall panel products. Works great for standard long guns but also fits rifles with wider hand guards and/ or suppressors.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Rubber inserts to protect the rifles.
Dimensions: 3.5” high X 7” deep.
Weight: 1.6 lbs.
Sold as each.
Vertical hanger that holds the rifle vertical but sideways. This part is used to support the stock part of the rifle when hanging it vertical-sideways on any of the wall panel products. Comes with the hanger and the base. Part VHS-B-1 completes the set to hold one rifle.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 4” high X 3.5” wide.
Weight: 1 lb.
Sold as each.
Vertical Stock Support Shelf, Hybrid 1-rifle. This lower shelf is designed for one vertical rifle, fitting most rifle stocks with a cutout. It features an HDPE insert with foam stand-offs to prevent damage. The “Hybrid” design combines steel and HDPE, compatible with all our wall panels. The rifle can be positioned to face either direction, and a small strap bracket aligns the shelves. Upper hangers are still needed for proper storage.
Includes:
1 steel shelf hanger, 1 HDPE insert 1 strap bracket all necessary screws.
Steel part of the hanger:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown
HDPE part of the hanger:
Made from a high density plastic composite material
Available in Black
Total hanger:
Dimensions: 1” high x 3 ¼” wide 11” deep
Sold as each
2 Lbs.
Vertical Stock Support Shelf, Hybrid 3-rifle. This lower shelf is designed for vertical storage of three rifles, fitting most rifle stocks with its HDPE insert and foam stand-offs to prevent damage. The hybrid design combines steel and HDPE and is compatible with most panels, excluding 45.8 and 24.3 products. Rifles can face either direction, and it includes a strap bracket for alignment. Upper hangers are still needed for proper storage.
Includes:
1 steel shelf hanger, 1 HDPE insert, 1 strap bracket and all necessary screws.
Steel part of the hanger:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown
HDPE part of the hanger:
Made from a high density plastic composite material
Available in Black
Total hanger:
Dimensions: 1” high x 9 ¾” wide 11” deep
Sold as each
Hybrid Vertical Stock Floor Shelf System designed to install directly on the floor for clean, stable vertical rifle storage. This shelf integrates seamlessly with thin wall panels WPT-11.29 and WPT-11.10, and is also fully compatible with all of our other wall panels.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
HDPE insert helps protect rifle stocks.
Dimensions: 4.5″ High x 9.75″ Wide x 11.5″ Deep.
Weight: 6 lbs.
Sold as each.
Vertical retail display hanger, right side. Holds 3 rifles vertical at angle away from the panels to the right side. Sticks out from the panels 12”. Includes hanger and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3 ½” high X 12” deep.
Weight: 1 lb.
Sold as each.
Vertical retail display hanger, left side. Holds 3 rifles vertical at angle away from the panels to the left side. Sticks out from the panels 12”. Includes hanger and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3 ½” high X 12” deep.
Weight: 1 lb.
Sold as each.
Magwell Hangers
Mag Well Horizontal Hanger. This hanger holds the rifles with a magazine well insert. Rifle can face either direction. Secures into place with the magazine release. HDPE insert fits 7.62 rifles with standard magazine well. Holds 1 rifle.
Includes hanger, HDPE insert and mounting screws.
Made from 14-gauge steel and HDPE
Powder coat finish
Available in Tan, Grey and Brown color
Dimensions: 6” high x 4” wide
Weight: 1 lbs
Sold as each
Magazine well horizontal hanger. Holds AR with a magazine well insert. Rifle can face either direction. Secures into place with the mag release. Fits 5.56 rifles with standard mag well. Holds one rifle. Includes hanger, plastic insert and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown.
Dimensions: 6” high X 3 ¼” deep.
Weight: 1 lb.
Sold as each.
Holds AR style rifle vertical to the rack with a magazine well insert but on a 45 degree angle. Can sit straight up and down or with a slight slant toward the rack. The rifles secures into place with the magazine release. Fits 5.56 caliber rifles with a standard wag well. Holds 1 rifle.
Includes: Steel Hanger HDPE Insert Mounting Screws
100% Made in the USA
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Dimensions: 3.5” High x 4.75” Wide x 8” Deep
Weight: 1.2 lbs.
Sold as a set
Magazine magwell hanger, vertical on 45. Holds AR style rifle vertical to the rack with a magazine well insert but on a 45 degree angle. Can sit straight up and down or with a small slant toward the panel. Secures into place with the mag release. Fits 5.56 rifles with standard mag well. Holds 1 rifle.
Includes hanger, plastic insert and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3 ½” high X 8” deep.
Weight: 1.2 lbs.
Sold as each.
The thin wall panel products are meant for areas where a full rack isn’t necessary. They work great for stand-alone racks and for smaller wall spaces in gun rooms. This panel is designed for horizontal gun display. Because the panels are so thin most of the wall will show behind the guns being displayed. The spacing for the hanger adjustment is closer than normal for even adjustability.
These panels interlink with each other when installing them one on top of the other.
Made from 14-gauge steel. Available in Tan, Grey and Brown color powder coat finish. Dimensions: 24” high x 3 wide. Sold as each.
Magwell Horizontal Hanger. Holds Double Stack Glock 9mm with a magazine well insert. Handgun faces left. Secures into place with the mag release. Fits Glock 9mm caliber handguns with standard Magwell. Holds one handgun.
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Dimensions: 6” High x 4.5″ Wide x 3.25” Deep.
Weight: 1 lb.
Sold as each.
Magwell Horizontal Hanger. Holds Double Stack Glock 9mm with a magazine well insert. Handgun faces left. Secures into place with the mag release. Fits Glock 9mm caliber handguns with standard Magwell. Holds one handgun. Includes: Steel Hanger, HDPE Insert, Mounting Screws
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Dimensions: 6” High x 4.5″ Wide x 3.25” Deep.
Weight: 1 lb.
Sold as each.
Handgun Hangers
Handgun hanger that holds 1 handgun. Keeps it close to the wall panels so the gun so it’s easy to see and display.
Rubber insert to protect the gun.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Brown, and Gray color.
Dimensions: 4” high X 3” wide X 3″ deep.
Weight: 1 lb.
Sold as each.
Handgun hanger that holds 1 handgun. Keeps it close to the wall panels so the gun so it’s easy to see and display.
Rubber insert to protect the gun.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 4” high X 3” wide X 3″ deep.
Weight: 1 lb.
Sold as each.
This hanger holds 1 handgun horizontal, close to the wall. Similar to the HGH-1 but this model shows more of the gun. Great for display.
Rubber insert to protect the gun.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown.
Dimensions: 4” high X 3” wide X 3″ deep.
Weight: 1 lb.
Sold as each.
Heavy-duty Hybrid Handgun Hanger. This hanger is meant to larger handguns and/or handguns with attached suppressors. The 2 “U’s” are spaced further apart than our standard HGH-1 models which allows a larger gun to sit more stable. The “Hybrid” design features half steel and half HDPE, a plastic composite material. The HDPE inserts are interchangeable so the can gun can be made to sit either direction. Holds guns flat against the panel.
Includes the steel hanger, HDPE “U” inserts and all necessary screws.
Steel part of the hanger:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown
HDPE part of the hanger:
Made from a high density plastic composite material
Available in Black
Complete Hanger:
Dimensions: 3” high x 4 ½” wide 3” deep
Weight: 1 lb.
Sold as each
DOES NOT FIT IN A 22 CALIBER FIREARM
Handgun barrel hanger. Small coated rod goes into barrel to hold handgun. On the hanger, the gun sits at about 45 degrees to the wall and at a slight angle up. Supports 1 handgun. Includes hangers and mounting screw
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3 ½” high X 4” deep.
Weight: 1 lb.
Sold as each.
DOES NOT FIT IN A 22 CALIBER FIREARM
Handgun barrel hanger. Small coated rod goes into barrel to hold handgun. Handgun Barrel Holds the gun parallel to the wall. Supports 1 handgun.
Includes hangers and mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 3 ½” high X 6” deep.
Weight: 1 lb.
Sold as each.
DOES NOT FIT IN A 22 CALIBER FIREARM
Handgun barrel hanger. Small coated rod goes into barrel to hold handgun. Handgun Barrel Holds the gun parallel to the wall. Supports 1 handgun.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey, Brown
Dimensions: 3 ½” high x 5” wide x 1 ½” deep
Weight: 1 lb.
Sold as each
Holds 3 handguns vertical to the wall. Holds all styles with shorter and longer barrels. Very efficient handgun storage. For revolvers over to 3” we suggest our HGH-1 hanger.
Includes shelf and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 7 ¼” high X 9 ¾” wide X 8 ¼” deep.
Weight: 3 lbs.
Sold as each.
Hybrid Handgun Shelf. The “Hybrid” design features half steel and half HDPE, a plastic composite material. Holds 6 handguns. This shelf works with most styles of handguns including shorter and longer barrels. Great for efficient handgun storage. Fits most semi-auto’s up to 1911’s and also revolvers with barrels up to 3″ long.
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Dimensions: 7” High x 20” Wide x 8.25” Deep.
Weight: 6 lbs.
Sold as each.
Hybrid Handgun Shelf. The “Hybrid” design features half steel and half HDPE, a plastic composite material. Holds 10 handguns. This shelf works with all styles of handguns including shorter and longer barrels. Great for efficient handgun storage. Fits 1911’s and revolvers up to 3″. For longer barrels, we suggest our HGH-1 or HGH-1.1 hangers. Includes the steel hanger, HDPE plates and installation screws.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown.
Dimensions: 7 ½” high x 33” wide x 8 ½” deep
Weight: 9 lbs
Sold as each.
Hybrid Handgun Hanger – Left Facing The Hybrid Handgun Hanger (Left-Facing) provides a clean, angled display designed to securely hold most standard handguns while protecting their finish. Built with our hybrid construction, this hanger combines a durable steel body for strength with precision-fit HDPE inserts to prevent scratches and wear.
Steel part of the hanger:
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
HDPE part of the hanger:
Made from a high-density plastic composite material
Available in Black
100% Made in the USA
Dimensions: 3.125” High x 3.25” Wide x 3.125” Deep.
Weight: 1 lb.
Sold as each.
The Hybrid Handgun Hanger (Right-Facing) provides a clean, angled display designed to securely hold most standard handguns while protecting their finish. Built with our hybrid construction, this hanger combines a durable steel body for strength with precision-fit HDPE inserts to prevent scratches while maintaining a solid connection to the wall panel.
Steel part of the hanger:
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
HDPE part of the hanger:
Made from a high-density plastic composite material
Available in Black
100% Made in the USA
Dimensions: 3.125” High x 3.25” Wide x 3.125” Deep.
Weight: 1 lb.
Sold as each.
Magazine Shelves
Magazine shelf that’s hold approximately 5 each of handgun and smaller ammo magazines. Fits on any of the WP products except WPT-24.3.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 5” wide, 2” deep, 3” high.
Weight: 1 lb.
Sold as each.
Magazine shelf that’s hold approximately 5 each of 5.56/ .233 AR, AK and other magazines. Fits on any of the WP products except WPT-24.3.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 5” wide, 3” deep, 3” high.
Weight: 1 lb.
Sold as each.
Magazine shelf that’s hold approximately 5 each of 7.62/ 308 magazines. Fits on any of the WP products except WPT-24.3.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 6.5” wide, 3” deep, 3” high.
Weight: 1.5 lbs.
Sold as each.
Magazine Shelf Hanger, 3″ high x 3.25″ wide x 3.5″ deep. This is our most universal magazine storage hanger. It’s designed to work with multiple calibers and magazine sizes. It allows magazines to be stored standing up laying down.
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Dimensions: 3” Wide x 3” Deep x 3” High.
Weight: 1 lb.
Sold as each.
Magazine Shelf Hanger, 3” high x 3.125” wide x 5” deep. This larger, universal magazine shelf is made to match up with our single gun hangers. It works great with different caliber ammunition and different-size magazines. The mags can be stored standing up or lying down.
Designed and Built in the USA
Lifetime Warranty
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Specifications:
Weight: 1.2 lbs.
Sold as each.
Dimensions: 3” high x 3.125” wide x 5” deep.
Includes:
Steel Shelf Hanger
2 x Installation Screws
Magazine Shelf Hanger, 3″ high x 9.75″ wide x 5″ deep. This extra-large, universal magazine shelf is made to match up with our 3-gun hangers. It works great with different caliber ammunition and different-size magazines. The mags can be stored standing up or lying down.
Designed and Built in the USA
Lifetime Warranty
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Specifications:
Dimensions: 3″ high x 9.75″ wide x 5″ deep.
Weight: 2.2 lbs.
Sold as each.
Includes:
Steel Shelf Hanger
2 x Installation Screws
Modular Weapon Storage Shelves
This is a custom part, designed for displaying knives with a fixed blade. The size fits most knives. It includes 2 magnets to hold the knife in place for better display. It also has a small lip at the bottom of the shelf to prevent anything from falling off. Of coarse, this size is really universal and can be used to hold or display other parts or equipment.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Gray and Brown
Dimensions: 4” high x 12” wide x 5” deep
Weight: 2 lbs.
Sold as a set.
Includes:
1 – Shelf
2 – magnets
Perfect for night vision, optics, knives or anything else you want to put on it. Does have a small lip that goes around the outside of the shelf.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown.
Dimensions: 8” wide X 3” deep.
Weight: 1.4 lbs.
Sold as each.
Perfect to hold bigger items like binoculars, night vision, hearing protection. This product does have added support to hold heavier items like ammunition. Has a small lip that goes around the edge of the shelf. Comes with mounting screws
Made from 14 gauge steel.
Powder coat finish.
Available in Gray Tan and Brown color.
Dimensions: 11″ wide x 4″ deep.
Weight: 1.8 lbs.
Sold as each.
Perfect to hold bigger items like binoculars, night vision, hearing protection. This product does have added support to hold heavier items like ammunition. Has a small lip that goes around the edge of the shelf. Comes with mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown
Dimensions: 13″ wide x 8″ deep.
Weight: 3.2 lbs.
Sold as each.
Heavy-duty shelf meant for heavier items. Specially design sides and back for extra support. Works great for bulk ammunition and bigger items. It does work with all the different wall panels, weapon cabinets and free-stand racks. Comes with 1 shelf and all necessary screws.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey, Brown
Dimensions: 8” high x 16” wide x 10” deep
Weight: 8 lbs.
Sold as each
Heavy-duty shelf meant for heavier items. Specially design sides and back for extra support. Works great for bulk ammunition and bigger items. It does work with all the different wall panels, weapon cabinets and free-stand racks. Comes with 1 shelf and all necessary screws.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey, Brown
Dimensions: 8” high x 22” wide x 10” deep
Weight: 10 lbs.
Sold as each
This shelf model designed for display. There is a small lip to hold the weapon in place. Multiple units can be used next to each to look like one continuous shelf. This shelf is great for handguns, bolt rifles and accessories. NOTE: The pistol grip on an AR style rifle may prevent the gun from displaying properly on this shelf. Comes with a non-slip shelf liner. Includes shelf, liner and mounting screws.
Made from 14-gauge steel.
Available in Tan, Grey and Brown.
powder-coat finish.
Dimensions: 4” high x 10” wide x 8” deep.
Weight: 2 lbs.
Sold as each.
This hanger is used so a custom shelf top can be attached to the wall panels. It can be used anywhere on the wall panels and has holes so the shelf top can be secured to the bracket. Perfect for making shelves along the top of the racks to hold boxes, cases and other stuff you want up and out of the way.
Includes the shelf support and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 6” high x 1 ¼” wide x 7 ½” deep.
Weight: 2 lbs.
Sold as each.
Hook Hangers
The helmet hanger and heavy-duty hook hanger, built into one piece. It’s meant to hold a helmet and vest/ plate carrier but the compact design uses less room on the rack. The heavy duty hook is designed to support the weight of a plate carrier or other heavy equipment.
Includes:
H-Hook-1:
Made from 14-gauge steel
Powder coat finish
Available Colors: Brown, Gray and Tan
Dimensions: 2” high x 1” wide x 6” deep
HDPE Hanger:
Custom HDPE hanger
Available in Black
Dimension: 4” high x 15.5” wide x .5” deep
Set Together:
Weight: 3 lbs
Sold as: 1 set
Heavy-duty Hook hanger and Vest hanger combo. Both the Hook and Hanger are meant for heavier equipment like plate carriers. Also works great for vests and chest rigs. The hook holds the vest away from the rack to fit rear mounted pouches. This set includes 1 of the Hhook-1, heavy-duty hanger and all necessary screws.
Hhook-1:
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey, Brown
Dimensions: 2” high x 1” wide x 6” deep
Hanger:
Made from molded plastic
Available in Black
Dimensions: 10” high x 16” wide x 1 ¼” deep
Set together:
Set Weight 2 lbs.
Sold as set
Hook hanger that has 1 hook. Can be used to hang items on the wall panels like vests or chest rigs, backpacks, slings, ammo bandoliers etc. Fits on all wall panel parts.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 2” high X 1” wide X 6″ deep.
Weight: 1 lb.
Sold as each.
Retail Hook Hanger, rod is 12” long. Supports most retail packaging.
Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Gray Tan and Brown color.
Dimensions: 1/4” round rod X 12” deep.
Weight: 1 lb.
Sold as each.
Retail Hook Hanger, rod is 4” long. Supports most retail packaging.
Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown.
Dimensions: 1/4” round rod X 4” deep.
Weight: 1 lb.
Sold as each.
Retail Hook Hanger, rod is 4” long. Supports most retail packaging.
Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 1/4” round rod X 4” deep.
Weight: 1 lb.
Sold as each.
Retail Hook Hanger, rod is 8” long. Supports most retail packaging.
Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 1/4” round rod X 8” deep.
Weight: 1 lb.
Sold as each.
Retail Hook Hanger, rod is 8” long. Supports most retail packaging.
Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 1/4” round rod X 8” deep.
Weight: 1 lb.
Sold as each.
Modular Weapon Storage Accessories
Fits most suppressor up to 9” long. Includes mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown.
Dimensions: 4” high X 3” wide X 9 ¼” deep.
Weight: 1 lb.
Sold as each.
Suppressor Hanger, 12”. Fits longer suppressors up to 12”. Includes hanger and mounting screw.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey and Brown
Dimensions: 3” high x 12” deep
Weight: 3 lbs
Sold as each
Horizontal Suppressor Hanger. This new hanger holds a suppressor in the horizontal position. It uses our hybrid design that features a steel hanger with HDPE inserts. The steel keeps a strong connection to the rack, and the HDPE protects the suppressor from any damage. It’s great for organization; you can keep each suppressor with its associated gun or keep them all in one area.
Designed and Built in the USA
Lifetime Warranty
Made from 14-gauge steel
HDPE to protect suppressor
Powder-coat finish
Available Colors: Brown, Gray, and Tan
Specifications:
Dimensions: 3″ high x 4 1/2″ wide x 3″ deep.
Weight: 1 lb.
Sold as each.
Vertical Suppressor Hanger. This new hanger holds a suppressor in the vertical position. It uses our hybrid design that features a steel hanger with HDPE inserts. The steel keeps a strong connection to the rack, and the HDPE protects the suppressor from any damage. It’s great for organization; you can keep each suppressor with its associated gun or keep them all in one area.
Designed and Built in the USA
Lifetime Warranty
Made from 14-gauge steel
HDPE to protect suppressor
Powder-coat finish
Available Colors: Brown, Gray, and Tan
Specifications:
Dimensions: 4″ high x 3″ wide x 2 7/8″ deep.
Weight: 1 lb.
Sold as each.
The Folding knife hanger is designed to display or organize folding knives with a pocket clip. This size should hold about 6 folding knives. The hanger will take up about 4″ high x 11” wide of rack space. The bar is on a slight angle for a better display. The clip will attach over the horizontal bar.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Gray and Brown
Dimensions: 4” high x 11” wide x 1 3/4” deep
Weight: 1 lb.
Sold as a set.
Includes:
2 – Steel side hangers
1 – 11” horizontal mounting bar
Mounting screws
Knife Hanger, designed for a folding knife display. This size should hold about 10 folding knives. The hanger will take up about 4″ high x 18” wide of rack space. The bar is on a slight angle for a better display. A folding knife will clip onto the horizontal bar hanger.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Gray, and Brown
Dimensions: 4” high x 18” wide x 1 3/4” deep
Weight: 1 lb.
Includes:
2 – Steel side hangers
1 – 18” horizontal mounting bar
Mounting screws
This kit includes a plastic bin and the bin plate adapter. Bin size is 5” high x 6” wide x 9” deep. The bin adapter makes it so the bin can be attached to any wall panel. Accepts bin dividers (sold separately).
Includes:
1 – Bin Plate Adapter
1 – Black Plastic Bin
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 5” high x 6” wide x 9” deep.
Weight: 3 lbs.
Sold as each.
Bin Adapter plate that attaches to the back of the standard plastic bin so they can hang on any of our Wall Panel products. Fits most bin sizes.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown.
Dimensions: 4” high X 4.5” wide.
Weight: 1 lb.
Sold as each
Helmet hanger, Holds 1 helmet, fits all of the wall panels. Sits about 11″ high. Includes hanger and mounting screws.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 11” high X 3 ¼” deep.
Weight: 1 lb.
Sold as each.
Rail Hanger. This specialty hanger is designed to hang rail-mounted products and accessories to any Gallow rack. Using a 13-slot Picatinny rail, it will work great with almost any product. Sits 2” from the rack to the center of the rail. Includes 1 steel hanger, 13-slot Picatinny rail and all necessary screws.
Made from 14-gauge steel
Powder coat finish
Available in Tan, Grey, Brown
Rail part of the hanger: 13-slot Picatinny made from light-weight aluminum.
Total hanger: Dimensions: 3 ¾” high x 5 ½” wide 2 ½” deep
Weight: 1 lb.
Sold as each
This hanger is perfect for securing weapons to the racks but still allowing customer to take them off and check them out. It features a 36” security cable that tethers the weapon but easily extends and retracts back into place. It attaches to the trigger guard with a heavy-duty composite plastic loop so its strong enough but wont damage the gun.
Made from 14-gauge steel
Powder-coat finish
Available Colors are: Brown, Gray, and Tan
Specifications:
Dimensions: 3.5” High x 2” Wide 0.75” Deep.
Weight: 0.5 lb.
Includes:
1 – Steel plate hanger
1 – Steel Housing
1 – Retractable Cable
Mounting Screws
This custom hanger is meant to hold any rifle featuring a standard, 1.5″ dovetail ARCA rail. It mounts and secures using only the rail. No other point on the rifle is used so it appears to be floating on the rack. The rifle can be mounted to face right or left. This hanger uses an Arca clamp designed and built by Area419. Includes the steel hanger, Arca clamp and installation screws.
Made from 14-gauge steel
Area419 ARCA rail clamp
Power-coat finish
Available Colors are: Brown, Gray, and Tan
Specifications:
Dimensions: 4.75” High x 2.5” Wide x 4.5” Deep.
Weight: 1 lb.
Sold as each.
Includes:
1- Steel Hanger
1- Arca rail clamp by Area419
Mounting Screw
Attaches to the wall panel and allows for a cable to go through the hole and secures the gun in place. These products can be used anywhere on the wall panels and works with any of the hangers. It can be used to secure one or multiple guns.
Includes the locking hanger and mounting screw.
Made from 14 gauge steel.
Powder coat finish.
Available in Tan, Grey and Brown color.
Dimensions: 4 ½” high x 1” wide x 1 1/8” deep.
Weight: .5 lb.
Sold as each.
The Medium Horizontal Suppressor Hanger is designed to securely store pistol-sized suppressors in a clean, horizontal position while protecting their finish. Built using our hybrid construction, the hanger combines a durable steel body for strength with HDPE inserts that cradle the suppressor and prevent scratches or wear.
Made from 14-gauge steel
HDPE to protect suppressor
Powder-coat finish
Available Colors: Brown, Gray, and Tan
Specifications:
Dimensions: 3.125″ High x 3.25″ Wide x 3.125″ Deep.
Weight: 1 lb.
Sold as each.